MIL-DTL-18045G
Construction of type I preserver - Continued.
TABLE II.
Seam
Stch
stch
Stch
No.
Operation
type
type
inch
14
Installing left and right side
slide fasteners:
A. Place slide fasteners (open
position) from bottom. Turn
under fabric 1/2 inch and
stitch 1/4 inch from folded
edge (right side).
B. Repeat on opposite side (left).
301
LSb
8/10
C. S/N reinforcement stitches to
301
8/10
top and bottom both slide
fasteners.
15
Slide protective patches:
A. Protective patch cut from base
fabric with top edge on
selvage.
B. Fold under remaining three
301
LSd
8/10
sides and top stitch at bottom
of slide I/A/W premarked
locations.
16
Assemble the collar section:
A. Both collar pieces (right sides
301
SSa
8/10
to right side) sew 1/2 inch
from edge at neck opening of
collar to premarked locations,
leaving slide fastener opening,
back tacking 1/2 inch starting
and stopping, skip over slide
fastener opening and complete
other side in same manner.
B. Turn collar and top stitch 1/8
301
SSa
8/10
inch over tie tapes on both
sides.
C. Set slide fastener in collar
301
Ssa
8/10
opening place protective patch
over slide fastener end and
stitch 1/8 inch from edge.
NOTE: Slide fastener when closed
is to lay with slide fastener
tongue to right of collar.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business