MIL-DTL-18045G
Construction of type II preserver - Continued.
TABLE III.
Seam
Operation
Stch
stch
Stch
No.
type
type
inch
Fold fabric 1/2 inch and S/N
1/4 inch from edge, add stitch
to slide fastener half at edge
to form an easy to work with
operation.
B. Cut chafing patch (3-1/2 X 12
301
SSc
8/10
inches) 1 each turn under ends
3/8 inch (DO NOT STITCH).
13
Top stitch rest of fronts 1/8 inch
301
SSc
8/10
from edges.
14
Slot for large D-ring:
A. Cut slit I/A/W drawing and
location to inside and out-
side jacket sections.
B. Fold four edges 3/8 inch inward
to form a 3/4 inch X 3-3/4 inch
rectangular opening through
both inner/outer jacket.
C. S/N four sides (4 plies) 1/16
301
SSc
8/10
inch from edges.
D. S/N angle stitches in all four
301
SSa
8/10
corners for reinforcement.
15
S/N stitch across back above D-ring
301
SSa
8/10
slot I/A/W premarked locations,
stitching inner and outer jacket
together.
16
S/N stitch starting under armhole
301
SSa
8/10
along premarked locations curving
toward front, following marks at
approximately 3 inches from
bottom, across left front, the
back and right front along curved
marking, ending under right arm-
hole backlock stitch both ends.
17
Tunnel tapes (2 each):
A. Cut tunnel tapes, webbing 1-1/8
inches width X 66 inches long -
2 each.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business