MIL-DTL-18045G
Construction of type I preserver - Continued.
TABLE II.
Seam
Stch
stch
Stch
No.
Operation
type
type
inch
8
Cut webbing 1 inch wide X 4-1/4
301
SSat
Box-X
inches long for light attachment
loop, fold in half, stitch ends at
fold, and box-x to left side of
outer section of front jacket.
9
Stitch label to premarked location
301
SSa
8/10
on outside of the inside jacket
section 1/8 inch on all four sides
10
Bind slits (2 each) of outside
301
SSa
8/10
jacket section with 3/4 inch wide
tape.
11
Join armholes in and out jacket
sections:
A. With both inside and outside
301
SSa
8/10
sections (inner surfaces
together) stitch 1/2 inch from
edge around perimeter of both
armholes.
B. Open flat 1/2 inch seams and
301
Ssad
8/10
stitch 1 inch wide tape using
double needle 1/8 inch from
edges.
12
Join shoulder seams:
A. Inner surfaces together join
301
SSa
8/10
both shoulder seams 1/2 inch
from edge.
B. Stitch front starting approx-
imately 3/4 inch from shoulder
seam.
13
Closing front of vest (both sides).
301
Lsb
8/10
From shoulder seam starting 3/4
inch down stitch 1/2 inch seam,
taking in D-ring and tie tape
assemblies at premarked notches.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business