MIL-L-24778(SH)
Whistle.
(a)
Each vest shall be equipped with a nonmetallic, USCC
approved, whistle secured to the vest by a 22 inch long lanyard
cord.
The whistle shall be of a flat design and produce a loud
shrill dual tone. The whistle shall conform to "Code of Federal
Regulations" 46 Part 33.38-5.
The dimensions shall be no greater
than 2 inches long by 7/8 inch wide and 5/16 inch deep at the air
chamber .
Auto lamp unit.
Each vest shall be equipped with an auto lamp unit
(b)
which is powered by a water activated battery conforming to NAVAIR
drawing number 68A94C13, with the following exception: length of
the lead wire shall be 20 inches + 1 inch.
Buddy life line.
Each vest shall be equipped with a l-inch wide,
(c)
66 inch long (finished length) buddy life line attached according
to mark on left pocket flap pattern.
The line shall conform to
MIL-T-5038, Type IV.
Standard patterns to be used to cut working patterns will be
3.5 Patterns.
The working patterns shall be within +
furnished by the Government (see 6.3).
Neither the Government patterns, nor the
1/16 inches of the Government patterns.
working patterns shall be altered in any way, except that additional notches for
use during construction are permitted on the working patterns.
3.5.1 Pattern Parts.
The component parts shall be cut from materials as
No drill holes are allowed.
specified, and in Table I.
Patterns.
TABLE I.
,
r
Markers
Cut Parts
Pattern Parts
Material
2
Green Woven Material
Pocket Divider
(MIL-C-83429)
1
Flap - Right Side
Green Woven Material
(MIL-C-83429)
Green Woven Material
1
Flap - Left Side
(MIL-C-83429)
2
Green Woven Material
Pocket
(MIL-C-83429)
1
Green Woven Material
Bladder Casing Front
(MIL-C-83429)
1
Green Woven Material
Bladder Casing Back
(MIL-C-83429)
Hood Casing
Green Woven Material
2
(MIL-C-83429)
Green Woven Material
2
Pocket Tunnel Piece
(MIL-C-83429)
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business