MIL-L-24778(SH)
A hood with face shield is also provided to protect the user from
inflated.
splashing waves.
Auto Inflatable Utility Life Preserver MARK 5. MOD O.
FIGURE 1.
The materials and components shall conform to
3.3 Materials and components.
applicable specifications, standards, and patterns (see 3.5) required herein.
Unless otherwise specified, the non-metallic materials used in construction of the
inflation assembly shall not have been manufactured more than 24 months prior to
the date of delivery except for rubber products which shall have a cure date more
The components are the aramid vest and
than 12 months prior to the delivery date.
the inflatable bladder assembly.
The vest shall be constructed of the following materials and
3.3.1 Vest.
all components shall be Green, color 34088 of FED-STD-595 unless otherwise stated.
The back and sides shall be constructed of aramid
Aramid mesh.
(a)
raschel knit mesh conforming to MIL-C-43989.
Basic material. The base fabric shall be plain weave, aramid cloth
(b)
conforming to Type II, class 1 of MIL-C-83429.
The cloth binding for the mesh, casing, hood,
Tape . woven binding.
(c)
and pocket covers shall be constructed of MIL-T-5038, Type III.
Fastener tapes . The hook and pile fastener tape shall conform to
(d)
The fastener tape shall be attached
MIL-F-21840, Type II, class 1.
in locations as shown on the patterns.
Straps and webbing shall be
Straps and side adjustment webbing.
(e)
constructed of nylon conforming to MIL-T-5038, Type IV.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business