MIL-L-24778(SH)
The face shield shall be constructed of
(f)
Anti-splash face shield.
0.020-inch transparent vinyl plastic conforming to Type II, class 1
of L-P-375.
Grommets.
Brass grommets used in the vest and bladder shall
(g)
conform to MS20230, B10 and B20.
The slide fastener shall be molded plastic,
Slide fastener.
(h)
individual element or continuous element, monofilament, conforming
The tape shall be
to Type IV Style 8 Size MHS, of V-F-106.
synthetic or cotton/synthetic in the color black or green,
approximating the shade of the basic fabric.
The side adjustment strap shall be
Side adjustment hardware.
(i)
foward pull containing a one half inch adjustment buckle,
Waterbury part no. 104-0150 or equal, manufactured from virgin
acetal resin with not more than 20 percent (%) of reground of the
same material.
The fastener and its adjusting device shall
withstand a 175 pound (lb) pulling force for 15 seconds using the
appropriate webbing.
The front closure buckle shall be a one and a half inch,
Buckle .
(j)
side release buckle, Waterbury part no. 101-0150 or equal, manu-
factured from virgin acetal resin with not more than 20% of
The fastener shall withstand a 175
reground of the same material.
lb pulling force for 15 seconds using the appropriate webbing.
3.3.2 Inflatable bladder.
The coated cloth used in construction of the infla-
(a) Coated cloth.
table bladder and blast patch shall be heat-sealable polyurethane
coated nylon conforming to SAE AMS 3272 and AMS 3272/1 except that
3.75 pounds for warp, and 2.75 pounds for
tear strengths shall be:
The coated cloth color shall be Orange 32246 of FED-STD-595.
fill .
The blast patch shall be circular in shape with a diameter of 3
inches + 1/8 inch.
The inflation device shall be securely attached to the
(b) Manifold.
preserver by means of a brass manifold with a heat sealable base,
which shall in turn be heat sealed to the inside surface of the
bladder fabric, so that the inflation assembly projects on the
outside.
The manifold shall conform to NAVSEA Drawing 803-2482705.
The cord used to lace the bladder to the casing
(c)
Bladder laces.
shall be nylon MIL-C-5040, Type III.
Reflective tape for the front casing, hood
(d) Retro-reflective tape.
and bladder shall conform to US Coast Guard, "Code of Federal
Regulations" 46 Part 164.018 Type I.
The oral inflation valve and tube
(e) Oral inflation valve and tube.
shall be Type II, class 1, style E of MIL-O-81375 and shall be
4 1/8 inches + 1/8 inch.
The adhesive for securing the parts to the bladder shall
(f) Adhesive.
be chloroprene and conform to 3M PN 2141PT or equal.
The AIULP MK 5, MOD O shall have the following
3.4 Accessories.
accessories :
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business