MIL-L-24778(SH)
Construction
(cent'dl.
TABLE II.
Stch/
Thread
Seam/
Stch
Operation
No .
ndl
in
stch
type
bob/lpr
type
8-12
301
SSa-1
(k) Turn under side edges of pocket
Align folded side edges of
3/8 inch.
tunnel (op. 4 (j)), with folded edges
of pocket, and edgestitch along width
of tunnel, from notch to 1/4 inch from
The top of the
top edge of tunnel.
tunnel shall be positioned approxi-
mately 1-1/4 inches down from top of
pocket hem.
LSbj -1
8-12
301
Fold tunnel piece in half at
(1)
Position pocket onto vest,
notch.
according to marks on Raschel knit
front , and edgestitch the sides of the
bottom ply of the tunnel to the vest
from the notch to the top of the tunnel
Do not catch the top ply of
piece .
tunnel or pocket in stitching.
8-12
LSbj -1
301
Place top ply of tunnel piece in
(m)
finished position, aligning top edges,
and stitch 1/4 inch across top edge,
through both pieces of tunnel and vest,
simultaneously catching the straps made
of 1 inch webbing under the stitching.
Two straps shall be positioned towards
the front of the pocket, and one posi-
tioned towards the back of the pocket.
DO not catch the pocket piece in the
The straps shall be inser-
stitching
ted no less than 1/2 inch under the
The lengths of the straps
stitching.
shall be 12 inches.
8-12
301
LSbj -1
(n) Attach pocket divider to vest,
according to marks on Raschel knit
front, leaving an opening for the tun-
Backstitch each end of
nel piece.
stitching.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business