MIL-D-24542B
two replacement handwheels, two replacement exhaust tubes, four replacement
springs for each spring used in the demand regulator, and four replacement
actuating levers (horseshoes). The kit shall also contain six replacement inlet
fittings (low-pressure nozzles or inlet nipples) and six replacements for each
nut and each spring type of retainer used in the demand regulator. The indi-
vidual parts, unit packaged in accordance with the requirements of 5.5, shall be
additionally marked with their identifying numbers as used on the demand regu-
lator maintenance instruction sheet (see 3.11), and consolidated with the
maintenance instruction sheet into kit form. This kit shall be marked with a
manufacturer's part number.
3.8.2 First stage regulator operating space item kit. The first stage
regulator operating space item kit shall contain twelve replacement parts for
each replaceable part of the first stage regulator that is fabricated entirely or
in part from plastic or rubber, with the exception of the flexible hose assembly
and securing knob, The kit shall contain four replacement flexible hose assem-
blies (that is, hose with end fittings), four replacement high-pressure nozzles
(or that smallest or most basic subassembly that contains the high-pressure
nozzle), four replacement spring type of retainers, four replacement regulator
inlet (sintered) filters, four replacement relief valves (or that smallest or
most basic subassembly that contains the relief valve) , and two replacement
knobs. The individual parts, unit packaged in accordance with the requirements
of 5,5, shall be additionally marked with their identifying numbers as used on
the first stage regulator maintenance instruction sheet (see 3.11) and
consolidated with the maintenance instruction sheet into kit form. This kit
shall be marked with a manufacturer's part number.
3.8.3 Cylinder valve operating space item kit. The cylinder valve operat-
ing space item kit shall contain twelve replacement parts for each replaceable
part of the valve assembly that is fabricated either entirely or in part from
plastic or rubber and twelve replacements for each washer, with the exception of
the on and off handwheel; there shall be two replacement handwheels. There shall
also be four replacement valve stems and retainer nuts (or other retainer that
holds the valve handle to the valve stem) and four of each piece required to
completely replace the safety valve (or safety plug). The individual parts, unit
packaged in accordance with the requirements of 5,5, shall be additionally marked
with their identifying numbers as used on the cylinder valve maintenance instruc-
tion sheet (see 3.11), and consolidated with the maintenance instruction sheet
into kit form, This kit shall be marked with a manufacturer's part number.
3.9 Controlled source part. On all equipment delivered under one contract,
a part that is described by source control documentation shall be of a single
source and model.
3.10 Government furnished. The following items are Government-furnished
properties for incorporation into the lightweight diving outfit furnished under
this specification,
(a) Diver's intercommunications set (see 3.6).
(b) Diver's intercommunications set operations and technical manual
(see 3.12).
(c) Lightweight diving outfit technical manual (see 3.12).
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business