MIL-D-24542B
REQUIREMENTS
3.
3.1 First article, When specified in the contract or purchase order, a
sample shall be subjected to first article inspection (see 4.3 and 6.3).
3.2 Construction. The lightweight diving outfit shall consist of equipment
necessary to support a diving operation employing two working divers and one
standby diver. The outfit shall include four diver's mask assemblies (see 3.3),
three diver's umbilical assemblies (see 3.4), three integrated diver's vests (see
3.5), a diver's intercommunications set (see 3.6), a setup and maintenance kit
(see 3.7), and operating space items (see 3.7). A reusable container shall be
furnished that provides stowage for certain parts of the outfit (see 5.1.2.1).
3.3 Diver's mask assembly. The diver's mask assembly shall be in accor-
dance with the drawings listed on DL 4666881.
3.3.1 Sp ecial tooling. If specified (see 6.2.1), molds, jigs, and dies for
production of the mask frame and of the oral-nasal mask will be made available to
the contractor "as is, and where is" by the Government. This special tooling
will be available for viewing (as is, where is) by prospective bidders on a
contract for the purpose of preparation of their bids. At completion of a
contract under which the contractor has taken delivery of the special tooling,
the special tooling shall be redelivered to the Government in condition "as good
as received, less normal wear and tear".
3.3.2 Mask control. The mask control shall withstand mask control perform-
ance as specified (see 4.6.2).
3.4 Diver's umbilical assembly. The diver's umbilical assembly shall be in
accordance with the drawings listed on DL 4666883 and DL 4666950. The assembly
shall withstand continuity as specified (see 4.6.1). When specified (see 6.2.1),
this item shall be delivered disassembled.
3.5 Integrated diver's vest, The integrated diver's vest shall be in
accordance with the drawings listed on DL 4666989.
3.6 Diver's intercommunications set. The diver's intercommunications set
will be an item furnished by the Government (GFE, see. 3.10). The essential
mechanical and dimensional characteristics of this item are shown on Drawing
4666885.
3.7 Setup and maintenance kit. The setup (including tools) and maintenance
kit shall be in accordance with the drawing listed on DL 4666884.
3.8 Operating space items. Operating space items shall include those items
listed on DL 4666887, in the quantity indicated thereon, the demand regulator
operating space item kits (see 3.8.1 and 3.8.2), and the cylinder valve operating
space item kit (see 3,8.3).
3.8.1 Demand regulator operating space item kit. The demand regulator
operating space item kit shall contain twelve replacements for each part of the
demand regulator that is fabricated entirely or in part from plastic or rubber,
with the exception of the exhaust tube and the handwheel. The kit shall contain
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business