INCH-POUND
MIL-DTL-81543C
14 July 2010
SUPERSEDING
MIL-C-81543B (AS)
22 February 1980
DETAIL SPECIFICATION
CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for inflatable life raft and accessory container
assemblies.
1.2 Classification. Inflatable life raft containers will be of the following types.
Type I
- Container Assembly, Life Raft, Helicopter
Type II
- Container Assembly, Outer, Standard Soft Pack
Type III
- Container Assembly, Combination Life Raft and Equipment Container
Type IV
- Container Assembly, Rigid Seat Survival Kit or High Speed Soft Pack
Type V
- Container Assembly, Pararaft Kit for NB-7 Parachute
Type VI
- Accessory Container Assembly, LRU-12/A, LRU-13/A, and LRU-1/P
Type VII
- Accessory Container Assembly, LRU-14/A
Type VIII
- Accessory Container Assembly, LRU-15/A (Mark 20)
Type IX
- Accessory Container Assembly, 20 Man Life Raft, for Wing Installation in
KC-130F and C-130F Aircraft
Type X
- Container assembly, VEE Bottom Life Raft Helicopter
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to
dscpg&ispecomments@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4220
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business